Business

How to Use Spray for Pest Control

How to use Spray for Pest Control

Pest control protects from harmful insects, which are responsible for health issues and costly damages to the property. The most crucial part of successful pest control is the inspection, which is very important to get a thorough inspection done. It is necessary to provide the highest quality pest control service. Pests can cause a disturbance, and it is essential to control them before they create a nuisance.

The three principles of pest control are preventing pests, reducing the number of pests and eradicating them. There are many types of pest control methods, and spraying is one of them. In spraying, the chemicals are dissolved or suspended in water, and the mixture is applied as a fine mist on the pests. Pesticides are dispersed by different methods, such as spraying and dusting. There are different types of nozzles for spraying pesticides, such as air blast, hydraulic, centrifugal and heat energy types. 

Pesticide application plays a critical role in pest management. The use of pesticides involves knowledge of the application equipment and pest management. The application techniques should be target-oriented, and proper selection of application equipment is essential; spraying is one method that is the most efficient. The requirement and coverage of the spray droplet size also depend upon the mobility and the size of the pest. 

The pesticide should be appropriately applied to yield a good result; thus, the quality of the application of the pesticides is critical. While spraying a pesticide, you should take into consideration the following things-

  • Proper dosage should be applied.
  • You should see to it that the toxicant should reach the target.
  • The size of the droplet should be the appropriate size.
  • The density of the droplet should be on target.

While spraying, water is a common carrier of pesticides. But, air and oils are also used as carriers. We all know that the target’s shape, surface and size vary considerably. We should use fine spray particles to remain airborne for a more extended period. The hydraulic nozzles will not be effective if you want to spray flying insects such as mosquitoes. Here, there is a need to spray fine-sized particles that should remain airborne for longer. The number of droplets deposited per unit area for the fungicide application should be more. The spraying technique could greatly vary, and it may need fewer droplets to be deposited in case of highly mobile insect pests.

The pesticide can also be formulated in liquid or granular form, making it possible to apply small quantities of pesticides over a large surface area. Spraying is an application technique that can be appropriately adapted if we want to ensure the even distribution of certain quantities of pesticides. 

Many individuals avail the services of Pest Control Geelong and Termite Control Geelong as they are at the forefront of providing services to the customers in Geelong, and they are reliable.

What Are The Spraying Techniques?

We all know that most pesticides are applied as sprays. The liquid formulations of pesticides can be diluted with oil, or it could be directly involved in tiny drops to the crop by different types of sprayers. However, in some cases, the oil is used as a diluent or carrier of pesticides. 

The volume of spray liquid required for specific areas depends upon the spray type and the coverage. It also depends upon the total target area, number of spray droplets and size of the spray droplet. If the spray droplets are coarse-sized, then the spray volume required will be larger than the tiny size spray droplets. 

If the coverage is more, the spray volume requirement must also be higher. The technique of spraying is classified as-

  • High Volume Spraying.
  • Low Volume Spraying.
  • Ultra Low Volume Spraying.

The pest control professional has an advantage in the case of lower application volume over the high volume application. We know that the higher the volume to be applied, the more time and the more the application cost. 

All types of sprayers emit pesticide solutions in excellent spray form. The spraying nozzle is a device for emitting the spray liquid. It breaks the liquid into small droplets and throws them away from the nozzle.

Pest control professionals use different designs of nozzles to produce an appropriate droplet size spectrum. 

All the sprayers used for the high volume spraying methods are fitted with hydraulic nozzles. The Hydraulic nozzles are the ones most commonly used to spray nozzles for pesticide application.

Spraying Techniques

High volume spraying is a very common and popular method of pesticide spraying and the solution is prepared by mixing water with the pesticide formulation in the appropriate quantities. This dilute mixture is sprayed through the hydraulic nozzles and the spray volume requirement also depends upon many factors such as the sprayer capability and the nozzle characteristics.

These are some spraying techniques that are very rampant and used by professionals to kill pests.

Most Popular

To Top