Introduction
Trenching is the process of digging a trench to install a French drain. The goal of this type of french drain installation Frisco TX is to allow water in your landscape to flow away from your home or property, rather than pooling around it. When done properly, French drains can make it easier for you to keep up with yard work and other maintenance tasks because they prevent water from collecting in areas where it doesn’t belong—like under footpaths or driveways.
Determine the correct location
When you’re ready to start digging, first determine the correct location for your French drain. French drains are designed to remove water from a specific area, but they’re not intended to replace a drainage system or septic system (those who have one of those can use their existing pipes). They do not replace sump pumps, either—French drains are meant for small volumes of standing water only.
To ensure that you’ve chosen an appropriate spot for your new drain field, measure out the length and width of your yard before starting any digging work on it (this will make sure there isn’t anything blocking where it should be). Next up: deciding what materials go into making one!
Dig a trench
Dig a trench. This can be done with a shovel, but if you have some experience with digging trenches before, use that method instead of the one in this article. If not, go ahead and use whatever method works for you!
If we’re going to dig a French drain into our yard and we want it to work as efficiently as possible (which is very important) then we need some way of keeping our soil from washing out of the system after the french drain installation Plano TX has been completed. The best way to do this would be by using something called “backfill.” Backfill is basically just what it sounds like—it’s material used alongside an existing drainage system to prevent erosion from occurring again later on down through future years when there aren’t any more drains installed yet (but hopefully someday soon).
Line the trench with perforated pipe
First, you’ll need to line the trench with perforated pipe. This is a type of pipe that has holes in it, so water will flow through them as a garden hose would. It’s also called open-jointed pipe or perforated tubing and comes in several different sizes depending on how much drainage you need.
The main benefit of using this method is that the drain doesn’t require any additional materials like cement or gravel; instead, all you’ll need are some plastic covers (or shims) at each end of your trench to keep things shaped properly and prevent leaks from forming near where they meet up with each other later on down the line when things get wetter again after being installed properly the first time around!
Cover with fabric
To prevent roots from growing into the French drain, you’ll want to cover it with landscaping fabric. This will help keep soil from falling into the trench and is also an excellent barrier against weeds, which can grow through a pipe without any resistance at all.
Landscape fabric comes in different styles:
- Rolled – This type of fabric is rolled up on itself and has an open weave that allows water to pass through easily
- Rolled/Sewn – These are similar but have been sewn together for extra strength
Cover with dirt
Once you’ve installed your French drain, cover it with dirt. The purpose of covering the pipe is to prevent erosion and prevent any water from entering your home. You can use any type of soil, but mulch is usually recommended because it’s lightweight and doesn’t become compacted by rainwater runoff.
Conclusion
We hope this guide has been helpful in making your next french drain installation Little Elm TX a breeze! If you have any questions or comments, please feel free to contact us. We would love to hear from you about your experience and what other ideas we can try next time around 🙂
